Infrared Asphalt Repair

The easiest way to extend the life of your asphalt parking lot is to develop a pavement maintenance plan involving regular inspections and periodic asphalt preservation and preventative maintenance techniques. Infrared asphalt technology is the most cost effective solution for crucial repairs. This revolutionary technique blends the hot mix asphalt directly on the original asphalt and then thoroughly compacts the repaired area to create a seamless asphalt restoration. When you notice potholes, specifically in higher traffic areas, pavement heaving, uneven asphalt surfaces surrounding the catch basins (a common asphalt issue that often results after several freeze and thaw cycles), or when scruffed up and rough surfaces in driving lanes or parking stalls, it is imperative that you should consider infrared asphalt repair.

First, the affected area must be completely swept and blown clean, then remove all loose aggregate, sand, and water. The surface area is then heated to 325 degrees Fahrenheit for five to ten minutes depending on the asphalt depth, season, and existing aggregate. As soon as the affected area has been properly heated, raking occurs to remove failed aggregate and then a rejuvenator will be applied that replenishes the lost oils due to oxidation. Additional aggregate and material will be applied to the area so that it can be graded to the proper level. Once the fresh asphalt material is placed, it is then compacted with a multi-ton vibratory roller or asphalt vibratory plate.